Jalousie
Angled louvre slats. You see out, the street can barely see in — privacy without boxing the garden in.
- 120 mm louvre, 0.7 mm steel
- Panels up to 3 m
- Matt polyester finish
from €110 per m²
THE FULL RANGE
Everything we make, with prices
Every fence, gate and panel swap in the F&G range. All of it galvanized steel, factory coated in your colour, made to your measurements and installed by our own crew.
Prices below are guide prices for supply and installation. Fences are per square metre, gates and panel swaps are per unit. Your own quote is fixed and in writing before we order a single panel.
FENCES
Steel fencing, six profiles
The same build every time: galvanized steel boards or slats between posts, coated at the factory in your colour, panels up to 3 metres. What changes is the profile — how private it is, and how it looks from the street.
Rhombus
A 90 mm slat, 35 mm deep, with a 45° top that sheds the rain and a folded bottom lip. Far stiffer than a flat slat, and the luxury look of the range.
- 35 × 90 mm slat
- 45° top, folded lip
- The luxury look of the range
from €110 per m²
Horizontal
80 × 20 mm closed steel tube rails running level. The heaviest fence in the range, hot-dip galvanized and powder coated.
- 80 × 20 mm steel tube
- Hot-dip galvanized
- Segments up to 3 m
from €210 per m²
MOST POPULAR
Vertical
The classic timber picket look in steel. Partly open with gaps, or double-sided chess for full privacy.
- Seven board cuts to choose
- ALUZINC coated boards
- A colour per side available
from €110 per m²
Pine
The tree-shaped profile looks identical from both sides, so it keeps both neighbours happy on a boundary. The most private profile we make.
- Same face both sides
- 60 mm profile
- Least see-through in the range
price on request
BOARD CUTS
Seven board profiles, one fence
The vertical fence is built from steel boards, and the boards come in seven cuts. Same fence, same price bracket — it is purely the shape you prefer.
FOR HOUSING ESTATES
Got concrete posts? This is the easy one
If your garden already has concrete posts, the posts are usually grand. It is the timber between them that sags, rots at the base and needs staining every couple of years. We pull the timber out and fit steel boards straight into the same posts. No digging, no concrete, no new posts, and most gardens are finished in a day.
NO DIGGING
Before
After
The same garden and the same concrete posts, shot in winter and again after fitting. Drag to compare.
Estate panel swap
Steel boards drilled and anchored into your existing concrete posts, boarded on both sides so it is closed from the street. Each face can be its own colour, so neighbours split the cost and pick a colour a side.
1 daymost estate gardens, start to finish
€280per panel, supplied and fitted
2 coloursone for your side, one for theirs
0 diggingyour existing posts stay put
from €280 per panel, fitted
GATES
Gates and automation, matched to your fence
Every gate is welded to your opening and filled with the same profile as your fence, so the entrance reads as one piece. Prices are for the gate supplied and installed; automation is quoted on top.
Automated swing gates
Your gates on a remote. The ram kit mounts to the leaf and the post, so a pair of gates already hanging can be automated later without changing the gates.
- Brushless rams, two handsets
- Safety photocells + warning lamp
- Fitted new or retrofitted
quoted with your gate
Swing gates
The traditional double gate. Simpler than a sliding gate and a lower price for the same opening, with a recessed lockable option.
- 60 × 40 square tube frame
- Adjustable galvanized hinges
- Ground pins + padlock loops
from €1,900 supplied & installed
Side gates
A matching pedestrian gate made with the same filler and colour as the main gate, so the whole entrance reads as one piece. Lockable, with a post box built in if you want one.
- Made to your opening
- Filler matched to the fence
- Post box option
quoted with your gate or fence
Sliding gates
Runs along the fence line on sealed-bearing trolleys. Nothing swings into the drive, nothing drags on the ground — the answer for slopes and tight entrances.
- 60 × 40 / 60 × 60 frame
- Automation rack welded on
- Any filler in the range
from €2,400 supplied & installed
AUTOMATION & EXTRAS
The bits that go with it
Gate automation
Already have gates hanging? The rams mount to the leaf and the post, so a pair of gates we did not fit can still go on a remote. Brushless kit, two handsets, safety photocells and a warning lamp.
- Retrofit to existing gates
- 2 handsets + photocells
- Keypad entry option
quoted with your gate
Slat infill between pillars
Built rendered pillars or a low wall already? These are not made up panels. It is the same slats off the same fence, fitted into your openings the same way we fence between concrete posts, in any profile and colour from the range.
- The same slats as the fence
- Any profile in the range
- Fits render, block or brick
quoted per opening
Supply-only kits
Fitting it yourself? We supply any fence in the range as a kit — profiles cut to your measurements, posts, crossbars, rivets and screws, all coated in your colour.
- Cut to your measurements
- Posts, rivets and fittings included
- Delivered to you
price on request
EVERY PRODUCT, ANY COLOUR
Twelve colours, matt or gloss
Anything on this page is made in the house colours — anthracite, graphite, chocolate brown and jet black — plus wood imitation finishes, and the full RAL index made to order. Most colours come in matt or gloss.
The same fence, on a real jobJalousie in graphite, fitted by our crew →
Before you compare prices
- Guide prices, not quotes. The figures above are what these jobs usually land at, supplied and installed. Access, ground, slope and the number of posts all move it. Your written quote is fixed.
- Made to order. Nothing here sits in a warehouse. Your fence is cut and painted to your colour at the factory, so allow about 4 weeks from booking to fitting day. A small one off order, like a single gate on its own, waits on a production run and can take longer. You get the real date in writing before you pay a deposit.
- Supply and install as standard. Prices include our crew fitting it. Supply-only is available on any product if you would rather fit it yourself.
Seen what you want?
Tell us the product and a rough length and we price it. No visit, no obligation.